(NA2XSY) XLPE insulated, PVC sheathed single core high voltage cable with aluminum conductor

0AZN

NA2XSY brand cables are manufactured according to AZS 418-2010 (TS IEC 60502-2), TSE K 204 standards and belong to the same technical class as the ATİEB KABEL analogue.
These cables are used in industrial facilities, cable lines and stationary installation systems. It is suitable for installation on dry land and in conditions where level differences are limited. Does not spread combustion when installed alone.

Construction:

Conductor: stranded stranded aluminum (A) wires, class 2 according to IEC 60228

Multi-connector round formal conductor for 25–1000 mm²
Multiwire formal vessel with 5 sectors for 1000–1600 mm²

Supervascular screen: Extruded semiconducting polyethylene

Insulation: Polyethylene (XLPE)

Insulating screen: Extruded semi-conductive polyethylene

Separator layer: Blocking semiconductor tape

Screen: Copper wires and binding copper tape (S)

Separating layer: PET-F tape

External coating: Polyvinyl chloride (PVC, type Y)

Technical indicators:

Operating temperature: +90°C
Maximum heating temperature during gas: +1300°C
Maximum temperature of vessels during short circuit: +250°C
Minimum bending radius: 15×D (D – cable outer diameter)
Minimum installation temperature: -15°C
Maximum allowed screen temperature: +90°C
Nominal voltage: 6–30 kV
Service life: 30 years

Dimensions
1×25–1600 mm²