(NA2XSY-fl) XLPE insulated, flame retardant PVC coated, aluminum conductor single core high voltage cable

0AZN

NA2XSY-fl brand cables are produced according to AZS 418-2010 (TS IEC 60502-2), TSE K 204 standards and are of the same technical class as the ATIEB KABEL analog.
These cables are used in industrial facilities, cable lines and stationary installation systems. It is suitable for installation on dry land and in conditions where level differences are limited.
Thanks to the flame retardant PVC (Y-fl) coating, these cables prevent the spread of fire even when installed in groups and ensure safe operating conditions.

Construction:

Conductor: stranded stranded aluminum (A) wires, class 2 according to IEC 60228

25–1000 mm²: circular shaped multiwire vessel
1000–1600 mm²: clamped formal vessel with 5 sectors

Supervascular screen: Extruded semiconducting polyethylene

Insulation: Polyethylene (XLPE)

Insulating screen: Extruded semi-conductive polyethylene

Separator layer: Blocking semiconductor tape

Screen: Copper wires and binding copper tape (S)

Separating layer: PET-F tape

External coating: Non-flammable polyvinyl chloride (Y-fl)

Technical indicators:

Operating temperature: +90°C
Maximum heating temperature during gas: +1300°C
Maximum temperature of vessels during short circuit: +250°C
Minimum bending radius: 15×D (D – cable outer diameter)
Minimum installation temperature: -15°C
Nominal voltage: 6–30 kV
Service life: 30 years

Dimensions
1×25–1600 mm²