(NA2XS(F)2Y) XLPE insulated, water blocking semi-conductor tape, PE sheath, aluminum conductor single core high voltage cable

0AZN

NA2XS(F)2Y brand cables are produced according to AZS 418-2010 (TS IEC 60502-2) and TSE K 204 standards and are of the same technical class as ATİEB KABEL analogue.
These cables are used safely underground, in tunnels and in humid conditions. Water blocking semi-conductive tape (F) prevents water from entering the core and screen part of the cable, which ensures long-lasting and safe operation.
The cable is also resistant to mechanical effects, UV rays and soil pressure.

Construction:

Conductor: stranded stranded aluminum (A) wires, class 2 according to IEC 60228
- 25–1000 mm²: circular shaped multiwire vessel
- 1000–1600 mm²: clamped formal vein of 5 sectors

Supervascular screen: Extruded semiconducting polyethylene

Insulation: Polyethylene (XLPE)

Insulating screen: Extruded semi-conductive polyethylene

Separator layer: Blocking semiconductor tape

Screen: Copper wires and binding copper tape (S)

Water blocking layer: Semiconductor tape (F)

Outer cover: Polyethylene (2Y)

Technical indicators:

Operating temperature: +90°C
Maximum heating temperature during gas: +1300°C
Maximum temperature of vessels during short circuit: +250°C
Minimum bending radius: 15×D (D – cable outer diameter)
Minimum installation temperature: −20°C
Nominal voltage: 6–30 kV
Service life: 30 years

Dimensions
1×25–1600 mm²