(NA2XS2Y) XLPE insulated, PE sheathed single core high voltage cable with aluminum conductor

0AZN

NA2XS2Y brand cables comply with AZS 418-2010 (TS IEC 60502-2), TSE K 204 standards and are of the same technical class as the ATİEB KABEL analogue.
These cables are used in dry soils and in places where special protection against corrosion is not required, in channels and in stationary installation systems. It is resistant to sunlight and atmospheric effects, it is possible to install it in areas with limited level differences.

Construction:

Conductor: stranded stranded aluminum (A) wires, class 2 according to IEC 60228
- Multi-wire round formal vessel for 25–1000 mm²
- Clamped formal vein of 5 sectors for 1000–1600 mm²

Supervascular screen: Extruded semiconducting polyethylene

Insulation: Polyethylene (XLPE)

Insulating screen: Extruded semi-conductive polyethylene

Separator layer: Blocking semiconductor tape

Screen: Copper wires and binding copper tape (S)

Separating layer: PET-F tape

Outer cover: Polyethylene (2Y)

Technical indicators:

Operating temperature: +90°C
Maximum heating temperature during gas: +1300°C
Maximum temperature of vessels during short circuit: +250°C
Minimum bending radius: 15×D (D – cable outer diameter)
Minimum installation temperature: −20°C
Nominal voltage: 6–30 kV
Service life: 30 years

Dimensions
1×25–1600 mm²