(N2XSY) XLPE insulated, PVC sheathed copper conductor single core high voltage cable

0AZN

N2XSY brand cables comply with AZS 418-2010 (TS IEC 60502-2), TSE K 204 standards and are in the same class as RUS KABEL analog.
These cables are used in industrial areas, cable lines and stationary installation systems. It is suitable for installation in dry soils and in conditions where the level difference is limited. The cable does not spread combustion when installed alone.

Construction:

Conductor: Multi-stranded circular crimped copper, class 2 according to IEC 60228.

Multi-connector clamped round formal conduit for area 25–800 mm²
Clamped form of 5 sectors for 1000-1600 mm²

Supervascular screen: Extruded semiconducting polyethylene

Insulation: Polyethylene (XLPE)

Insulating screen: Extruded semi-conductive polyethylene

Separator layer: Blocking semiconductor tape

Screen: Copper wires and binding copper tape (S)

Technical indicators:

Operating temperature: +90°C
Maximum temperature of vessels during short circuit: +250°C
Maximum heating temperature of vessels during gas short circuit: +1300°C
Minimum bending radius: 15×D (D – cable outer diameter)
Minimum installation temperature: -15°C
Maximum allowed display temperature tolerance: +90°C
Nominal voltage: 6–30 kV
Service life: 30 years

Dimensions
1×25–1600 mm²