(N2XSY-LS (cat A)) XLPE insulated, flame retardant PVC sheathed copper conductor single core high voltage cable with low smoke and gas release

0AZN

N2XSY-LS (cat A) brand cables comply with AZS 418-2010 (TS IEC 60502-2), TSE K 204 standards and are of the same technical class as the RUS KABEL analogue.
These cables are used in industrial and energy facilities, cable lines and stationary installation systems. It is applied in dry land and where level differences are limited.
It minimizes toxic emissions in case of fire and ensures safe evacuation of people thanks to flame retardant PVC coating (Y-LS) with low smoke and gas release.

Construction:

Conductor: stranded stranded copper wires, class 2 according to IEC 60228
- Round shaped vessel for 25–800 mm²
- Clamped formal vein of 5 sectors for 1000–1600 mm²

Supervascular screen: Extruded semiconducting polyethylene

Insulation: Polyethylene (XLPE)

Insulating screen: Extruded semi-conductive polyethylene

Separator layer: Blocking semiconductor tape

Screen: Copper wires and binding copper tape (S)

Separating layer: PET-F tape

Inner coating: Non-flammable, low smoke polyvinyl chloride (Y-fl)

Cable top cover: PVC-LS (Y-LS) with low smoke and gas release

Technical indicators:

Operating temperature: +90 °C
Maximum heating temperature during gas: +1300 °C
Maximum core temperature during short circuit: +250 °C
Minimum bending radius: 15×D (D – cable outer diameter)
Minimum installation temperature: −15 °C
Nominal voltage: 6–30 kV
Service life: 30 years

Dimensions
1×25–1600 mm²