(N2XS(F)2Y) XLPE insulated, water-blocking semi-conductor tape, PE-sheathed, single-core copper conductor high voltage cable

0AZN

N2XS(F)2Y brand cables comply with AZS 418-2010 (TS IEC 60502-2), TSE K 204 standards and are of the same technical class as the RVB KABEL analogue.
These cables are suitable for use underground, in tunnels and in wet conditions. Thanks to the water-blocking semi-conductive tape, water is prevented from entering the core and screen part, which increases the longevity and safety of the cable.
The cable is resistant to outdoor conditions, mechanical effects and UV radiation.

Construction:

Conductor: stranded stranded copper wires, class 2 according to IEC 60228
- 25–800 mm²: circular shaped multiwire vessel
- 1000–1600 mm²: clamped formal vein of 5 sectors

Supervascular screen: Extruded semiconducting polyethylene

Insulation: Polyethylene (XLPE)

Insulating screen: Extruded semi-conductive polyethylene

Screen: Copper wires and binding copper tape (S)

Water blocking semi-conductive tape: Type (F) waterproofing tape

Separating layer: PET-F tape

Outer cover: Polyethylene (2Y)

Technical indicators:

Operating temperature: +90°C
Maximum heating temperature during gas: +1300°C
Maximum temperature of vessels during short circuit: +250°C
Minimum installation temperature: −20°C
Minimum bending radius: 15×D (D – cable outer diameter)
Nominal voltage: 6–30 kV
Service life: 30 years

Dimensions
1×25–1600 mm²