(N2XS2Yy) XLPE insulated, thickened PE sheath, copper conductor single core high voltage cable

0AZN

N2XS2Yy branded cables comply with AZS 418-2010 (TS IEC 60502-2) and TSE K 204 standards and are of the same technical class as the RVB KABEL analog.
These cables are used underground and in places where special protection against corrosion is not required, in channels and in stationary installation systems. It is resistant to sunlight and outdoor conditions.
The thickened polyethylene (PE) coating protects the cable from additional mechanical effects and enables long-term operation in underground applications.

Construction:

Conductor: stranded stranded copper wires, class 2 according to IEC 60228
- 25–800 mm²: circular shaped multiwire vessel
- 1000–1600 mm²: clamped formal vein of 5 sectors

Supervascular screen: Extruded semiconducting polyethylene

Insulation: Polyethylene (XLPE)

Insulating screen: Extruded semi-conductive polyethylene

Separator layer: Blocking semiconductor tape

Screen: Copper wires and binding copper tape (S)

Separating layer: PET-F tape

Outer cover: Thickened polyethylene (2Yy)

Technical indicators:

Operating temperature: +90°C
Maximum heating temperature during gas: +1300°C
Maximum temperature of vessels during short circuit: +250°C
Minimum bending radius: 15×D (D – cable outer diameter)
Minimum installation temperature: −20°C
Nominal voltage: 6–30 kV
Service life: 30 years

Dimensions
1×25–1600 mm²