(N2XS2Y) XLPE insulated, PE sheathed single core high voltage cable with copper conductor(N2XS2Y) XLPE insulated, PE sheathed single core high voltage cable with copper conductor

0AZN

N2XS2Y brand cables comply with AZS 418-2010 (TS IEC 60502-2), TSE K 204 standards and are of the same technical class as the РВБ КАБЕЛЬ analogue.
These cables are used underground and in dry land, ducts and stationary installation systems where corrosion protection is not required. It is resistant to sunlight, outdoor conditions and mechanical effects.
The cable can be installed in conditions where level differences are limited.

Construction:

Conductor: stranded stranded copper wires, class 2 according to IEC 60228
- 25–800 mm²: circular shaped multiwire vessel
- 1000–1600 mm²: clamped formal vein of 5 sectors

Supervascular screen: Extruded semiconducting polyethylene

Insulation: Polyethylene (XLPE)

Insulating screen: Extruded semi-conductive polyethylene

Separator layer: Blocking semiconductor tape

Screen: Copper wires and binding copper tape (S)

Separating layer: PET-F tape

Outer cover: Polyethylene (2Y)

Technical indicators:

Operating temperature: +90°C
Maximum heating temperature during gas: +1300°C
Maximum temperature of vessels during short circuit: +250°C
Minimum bending radius: 15×D (D – cable outer diameter)
Minimum installation temperature: −20°C
Nominal voltage: 6–30 kV
Service life: 30 years

Dimensions
1×25–1600 mm²